Konica Minolta 7020 Service Manual page 186

HOME
ADJUSTMENT 25
2. Copy count display and count reset by
parts to be replaced (Named; arbitrarily)
Set the limit value for the parts to be replaced, parts
No., parts name setting, copy count display and
count reset.
Step Operation procedure
1 Enter the 25 Mode.
2 [25 mode menu screen]
Press the [4. Parts counter ] key.
3 [Parts counter menu screen]
Press the [2. Count of parts (Named)] key.
4 [Copy count screen by parts to be replaced (named)]
Press the [
set or changed.
5 The following items can be set below:
[COUNT RESET] : To clear the copy count.
[LIMIT SET] : To enter the limit value (6-digit).
[P/N SET] : To enter the parts number (9-digit).
[Parts name] : To enter the parts name.
6 Press the [RETURN] key, then return to copy
count screen by parts to be replaced.
] or [ ] key to select the data to be
List of parts to be replaced (arbitrarily)
No. Count timing
1 When copy count (at the paper exit is completed)
2 When copy count (at the paper exit is completed)
3 When copy count (at the paper exit is completed)
4 When copy count (at the paper exit is completed)
5 When copy count (at the paper exit is completed)
6 When copy count (at the paper exit is completed)
7 When copy count (at the paper exit is completed)
8 When copy count (at the paper exit is completed)
9 When copy count (at the paper exit is completed)
10 When copy count (at the paper exit is completed)
11 When copy count (at the paper exit is completed)
12 When copy count (at the paper exit is completed)
13 When copy count (at the paper exit is completed)
14 When copy count (at the paper exit is completed)
15 When copy count (at the paper exit is completed)
16 When copy count (at the paper exit is completed)
17 When copy count (at the paper exit is completed)
18 When copy count (at the paper exit is completed)
19 When copy count (at the paper exit is completed)
20 When copy count (at the paper exit is completed)
21
When paper is fed from by-pass tray
22 When paper is fed from tray 1
23 When paper is fed from tray 2
24 When paper is fed from tray 3
25 When paper is fed from tray 4
26 When paper is fed from ADU
27 When paper is exited from main body
28 When original is fed into RADF
29 When original is fed into RADF
30 When original is fed into RADF
4-28