Konica Minolta 7020 Service Manual page 270

HOME
KRDS
i. Press the [SET] key, and then the [RETURN] key
to end setting. The screen will return to the calling
time set menu screen.
Step Operation procedure
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [9. KRDS setting ] key.
3 [KRDS setting menu screen]
Press the [1. Calling time set] key.
4 [Calling time set menu screen]
Use the [1. Calling mode-1] (Setting designated
date calling setting).
5 [Calling mode-1 (Designed date calling)
setting screen]
Enter year, month and day using the numeric
key on the screen, then press the [<<], [>>] key
to move the cursor to entering position of time.
6 Enter time and minute using the numeric keys on
the screen, then press the [SET] key.
7 Press the [RETURN] to end the setting.
2. Setting regular date & time calling
The copier will call the host at the regular time
specified.
(1) Screen selection
Select the [2. Calling mode-2] (regular data & time
calling setting) in the calling time set menu screen to
display the calling mode-2 (regular data & time
calling) setting screen.
Press the [RETURN] key to exit the calling mode-2
(regular data & time calling) setting screen and return
to the calling time set menu screen.
(2) Mode selecting method
a. Select and press the desired mode in the
[monthly], [weekly], [daily] keys.
There are three mode type (month, week, day)
that can be set.
b. The current selected mode is high lighted
according to the mode key.
At this time, the setting contents will be appeared
in the message indication area at line 2.
6-14