Konica Minolta 7020 Service Manual page 172

HOME
25
ADJUSTMENT
*14 : 8.5x11 APS (Japan, Metric), A4 APS (
If this bit is to "1" (No), the copier will forcibly copy as
A4 in Japan/Metric if it detects an original size of
8.5x11, and will forcibly copy as 8.5x11 in Inch. if it
detects an original size of A4). Under the default
setting, APS operates for both A4 and 8.5x11.
*15 : Settings related to nonstandard original sizes
• SW21– 5 Copy setting of platen small size (A4/8.5
x 11 or smaller)
Selects whether to copy on the APS detected size
when APS detected the original as A4 or smaller,
or to ignore the APS detected size and copy on A4
(Japan, Metric) or 8.5 x 11 (Inch).
• SW21– 3 (Inch only) Copy setting of platen small
size (8.5 x 11 or smaller)
Selects whether to copy on the APS detected size
when APS detected the original as 8.5 x 11 or
smaller, or to ignore the APS detected size and
copy as nonstandard size.
When both SW21– 5 and SW 21– 3 are set to "1",
the setting of 21– 5 has priority over the 21– 3.
• SW7– 3 Nonstandard-size switch for platen APS (1)
Selects whether to copy on B6 (Japan), A5
(Metric) or 5.5 x 11 (Inch) when the APS detected
the original as nonstandard-size, or to copy on the
APS selected nonstandard size.
When both SW7– 4 and SW7– 3 are set to "1", the
setting of 7– 4 has priority over the 7– 3.
• SW7– 4 Nonstandard-size switch of platen APS (2)
Selects whether to copy on A4 (Japan, Metric) or
8.5 x 11 (Inch) when the APS detected the original
as nonstandard-size, or to copy on the APS
selected nonstandard size.
)
Inch
4-14