Toshiba e-studio 900 Operator's Manual page 89

Copying
Selecting [Same Width]
A Press [Same Width].
2
B Press [Center], and then set the erase center width using [n
C Press [Border], and then set the erase border width using [n
Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the part you want to change, and then set an erase mar-
gin width with [n
D
Press [2-sided Setting] and [Original (Back)].
Note
If you do not need to erase the center or border on the back of the original,
proceed to step F.
E
Set the center or border to be erased on the back.
Note
Erasing the center or border on the back is valid only when you copy two-
sided originals.
F
Place originals, and then press the { { { { Start} } } } key.
78
n ] and [o
n o ]. o
n o
n ] and [o
n o ]. o
n o
n ] and [o
n o ]. o
n o