Toshiba e-studio 900 Operator's Manual page 39

Copying
C
Fit the side fence to the paper, and then set the end fence (B B B B ).
2
Note
To remove the end fence, slide it to the left.
D
Press the elevator switch on the multi bypass tray (Tray 7).
Note
The green lamp of the elevator switch is blinking while the tray is going up
and down, and keeps lit when it stops.
Press the elevator switch to move down original table if you want to either
add paper or remove jammed ones.
28
1
2
1
ZJAY050N
ZJUH070J
ZJAY060N