Toshiba e-studio 900 Operator's Manual page 116

A
Press [Stamp].
B
Press [Page Numbering].
C
Select the format.
Note
You can specify the stamp position, pages to be stamped, and numbering.
See p.105 "Changing the stamp position", and p.105 "Specifying the first
printing page and start number".
D
Place originals, and then press the { { { { Start} } } } key.
Changing the stamp position
A
Press the left bottom [Change].
B
Select the desired position, and then press [OK].
Specifying the first printing page and start number
If you selected (P1,P2..., -1-,-2-..., P.1, P.2..., 1, 2..., )
Note
Below gives an example based on when (P1, P2...) is selected. The steps are
the same for other cases.
A
Press the right bottom [Change].
Copy Functions
2
105