Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Is Displayed - Toshiba e-studio 900 Operator's Manual

If Your Machine Does Not Operate as You
Want

When a Message is Displayed

The following chart contains explanations of common messages. If other mes-
sages appear, follow the instructions as they are displayed.
Message
Cannot detect original size. The size of the originals
Check original orientation. There is no copy paper in
Check paper size.
It is over stapling capacity. The number of sheets per
Cannot staple paper of this
size.
Maximum number of sets
is .
Cannot copy. Original is
being scanned by other
functions.

3. Troubleshooting

Causes
placed is difficult to detect.
See p.9 "Sizes difficult to
detect".
Original is not placed.
the same orientation as the
originals.
Incorrect paper size is set.
set is over the staple capac-
ity.
The Staple function cannot
be used with the paper size
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
The Document Server or
Scanner function is in use.
Solutions
Place the original on the exposure
glass. See p.13 "Placing Originals on
the Exposure Glass".
If the original size is difficult to de-
tect, select the size manually.
Do not use Auto Reduce/Enlarge
mode.
Place originals.
Place the original in the same orien-
tation as the copy paper.
If you press the { { { { Start} } } } key, copy
onto the selected paper will start.
Check the stapler capacity. See p.46
"Staple".
Select a paper size that can be used
in Staple mode. See p.46 "Staple".
You can change the maximum copy
quantity. See p.126 "Max. Number
of Sets".
To cancel the job in process, press
[Exit], and then press the { { { { Document
Server} } } } or { { { { Scanner} } } } key. Next, press
the { { { { Stop} } } } key. When the message "
[Stop] was pressed. Stop storing?"
appears, press [Stop].
115