If You Cannot Make Copies As You Want - Toshiba e-studio 900 Operator's Manual

If You Cannot Make Copies As You Want

This section explains causes and remedies when copy results are not as expect-
ed.
Basic
Problem
Copies are not stapled.
Staples are wrongly posi-
tioned.
You cannot combine sever-
al functions.
Paper frequently jams.
Originals jam.
Edit
Problem
In Double Copies mode,
parts of the original image
are not copied.
In Border, Center, or Cen-
ter/Border mode, parts of
the original image are not
copied.
Causes
There are staples jammed
in the stapler.
The number of copies ex-
ceeds the capacity of the
stapler.
Copy paper is curled.
Originals are not set cor-
rectly.
Selected functions cannot
be used together.
The paper size setting is in-
correct.
Different size originals are
placed in the ADF.
Causes
The combination of origi-
nal and copy paper is not
correct.
You set a wide erased mar-
gin.
Originals are not scanned
correctly.
If You Cannot Make Copies As You Want
Solutions
Remove jammed staples. See Gener-
al Settings Guide.
Check the stapler capacity. See p.144
"Staple".
Turn the copy paper over in the
tray.
Check the correct position to place
the originals. See p.46 "Staple".
Check the combination of functions
and make the settings again.
Reference
p.141 "Combination Chart"
Set the paper size correctly. See "Pa-
per Tray Settings", General Settings
Guide.
Check that the side fences and back
fence are set in the paper tray.
Set the Mixed 1&2 Sided function.
See p.71 "Mix 1 & 2 Sided".
Solutions
Select A3L (11" × 17"L) for A4 K
" × 11"K) originals and A4L
1
(8 /
2
" × 11"L) for A5K (5
1
(8 /
2
1
8 / "K) originals.
2
Make the margin width narrower.
You can adjust it between 2–99 mm
(0.1"–3.9"). See p.132 "Erase Border
Width"and p.132 "Erase Center
Width".
Place the originals correctly.
3
" ×
1
/
2
117