Toshiba e-studio 900 Operator's Manual page 156

• When using Double copies, or "1 Sided → 1 Sided", "1 Sided → 2 Sided",
"2 Sided → 1 Sided" or "2 Sided → 2 Sided" in Combine mode, select K
original for L copy and L original for K copy.
• When using "Left 2" or "Top 2" with Double copies, or "1 Sided → 1 Sid-
ed", "1 Sided → 2 Sided", "2 Sided → 1 Sided", or "2 Sided → 2 Sided" in
Combine mode, select K original for L copy and L originals for K copy.
• If you use the Auto Paper Select function in Mixed Size mode, the machine
selects the proper size of paper and staples it even if you place different
sizes of originals. Set the size of paper you want to use in the paper tray
beforehand. The sizes of the paper you can staple in Mixed Size mode are
as follows:
• A3L and A4 K
• B4 L and B5 K
• 11" × 17"L and Letter (8
The sizes and orientations of paper you can staple and stapler capacity are
as follows.
• Finisher
Paper sizes and orientations
A4KL, B5KL, 8
A3L, B4L, 11" × 17"L, 8
In Mixed Size Mode
A4K/A3L, B5K/B4L, 8
11"K/11" × 17"L
• When the number of copies exceeds tray capacity, copying stops. If this
happens, remove copies from the tray, and then resume copying.
The finisher capacities after stapling are as follows.
• Finisher
Paper sizes and
orientation
1
A4KL, B5KL, 8
11"KL
A3L, B4L, 11" × 17"L,
" × 14"L
1
8 /
2
• You cannot change stapling positions during copying.
• When the original image is rotated, stapling position turns by 90 degrees.
• When [Top] or [Bottom] is selected and paper with the same orientation as
the original is not loaded, the image is rotated and paper of the same size
and different orientation is selected.
• With certain stapling settings, you cannot use the Rotate function.
" × 11")K
1
/
2
" × 11"KL
1
/
2
" × 14"L
1
/
2
" ×
1
/
2
Number of the sheets
" ×
/ 10-100 sheets
2
2-9 sheets
10-50 sheets
2-9 sheets
Supplementary Specifications
Stapler capacity (sheets)
100
50
50
Number of stapled copies
(sets)
200-30
150
150-30
150
5
145