Toshiba e-studio 900 Operator's Manual page 29

Placing Originals
Placing custom size originals
When placing custom size originals in the ADF, specify the size of the originals.
1 Note
Paper with a vertical length of 128–297 mm (5.1" – 11.6") and a horizontal
length of 128–432 mm (5.1" – 17.0") can be placed with this function.
A
Press [Special Original].
Note
You can also set to display [Custm Size] in initial settings. See p.129 "Special
Original Display".
B
Press [Custm Size], and then [OK].
C
Enter the horizontal size of the original using the number keys, and then
press the { { { { #} } } } key.
Note
If you make a mistake, press [Clear], and then enter the value again.
D
Enter the vertical size of the original using the number keys, and then press
the { { { { #} } } } key.
Note
To store the specified size, press [Program], and then [Exit] in the confirma-
tion dialog box.
E
Press [OK].
F
Place originals, and then press the { { { { Start} } } } key.
Note
You can also select the Special Original function by pressing [Output/Cstmz.
Function].
18