Toshiba e-studio 900 Operator's Manual page 26

Note
Once the bottom plate of the ADF rises, do not place or insert originals in
the ADF.
Straighten curls in the original before placing it in the ADF.
To prevent multiple sheets being fed at once, fan stacks of originals before
placing then in the ADF.
Place the original squarely.
You can set the rise time of the bottom plate of the ADF. See "ADF Original
Table Elevation", General Settings Guide.
Batch mode
In batch mode, the machine copies originals of more than 100 pages as a single
document, even if it is placed in the ADF in sections.
Important
Place special originals, such as translucent paper, individually.
A
Press [Special Original].
Note
You can also set to display [Batch] in initial settings. See p.129 "Special
Original Display".
B
Press [Batch], and then [OK].
C
Place the first section of the original, and then press the { { { { Start} } } } key.
D
After the first section of the original has been fed, place the next, and then
press the { { { { Start} } } } key.
E
If Sort, Combine, or 1 Sided→2 Sided function is used, press the { { { { #} } } } key
after all of the originals have been fed.
Note
If you want to copy subsequent originals in this mode, repeat step D.
Placing Originals
1
15