Toshiba e-studio 900 Operator's Manual page 88

Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the border you want to change, and then set an erase
border width using [n
D
Press [2-sided Setting], and then [Original (Back)].
Note
If you do not need to erase the border on the back of the original, proceed
to step F.
E
Set the border to be erased the back.
Note
Erasing the border on the back is valid only when you copy two-sided
originals.
F
Place originals, and then press the { { { { Start} } } } key.
Center/border erase
A
Press [Edit].
B
Press [Erase Cntr/Brdr.].
C
Set the border to be erased.
n ] and [o
n o ]. o
n o
Copy Functions
2
77