Toshiba e-studio 900 Operator's Manual page 54

A
Press [
].
B
Enter the number of copy sets using the number keys.
Note
The maximum number of sets is 9999.
To confirm the type of finishing, press the { { { { Sample Copy} } } } key. See p.43
"Sample copy".
C
Place originals, and then press the { { { { Start} } } } key.
Note
When placing an original on the exposure glass, start with the first page to
be copied. When placing an original in the ADF, set so that the last page is
on the bottom.
When placing an original on the exposure glass or in the ADF using batch
and SADF mode, press the { { { { #} } } } key after all the originals have been scanned.
Sample copy
Use this function to check copy settings before making a long copy run.
Note
This function can be used only when the Sort function has been turned on.
A
Select Sort and any other required functions, and then place originals.
B
Press the { { { { Sample Copy} } } } key.
One copy set is made as a sample.
C
If the sample is acceptable, press [Print].
The number of copies made is the number specified, minus one for the proof
copy.
Note
If you press [Suspend] after checking the results, return to step A to adjust
copy settings as necessary. You can change the settings for Staple, Punch,
Margin Adjust, and Designate. However, depending on the combination
of functions, you may not be able to change certain settings.
Copy Functions
2
43