Toshiba e-studio 900 Operator's Manual page 159

Specifications
Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different to sizes listed in the following chart, the
erased margin might be shifted.
• Metric version
Where original is set
Exposure glass
ADF
• Inch version
Where original is set
Exposure glass
ADF
5
You can erase two parts using "Erase Inside 1" with "Erase Inside 2".
Margin Adjustment
If you set a binding margin too wide, part of the image may not be copied.
When making copies in Combine mode, the binding margin is added to cop-
ies after the combination is finished.
Preset Stamp
• You can change the size and density of the stamp with User Tools.
Depending on paper size, if you change the stamp size, part of the stamp
may not be printed.
• When you use this function with the Magazine or Booklet function, you
can print the stamp only on the first page.
Date Stamp
• When using Combine mode, the date stamp is printed as follows:
• When using the Magazine or Booklet function, the date stamp is printed as
follows:
148
03/03/2003
03/03/2003 03/03/2003
Paper size and orientation
A3L, B4L, A4KL, B5KL, A5L, 8
" × 13"L
1
8 /
2
A3L, B4L, A4KL, B5KL, A5KL, 8
Paper size and orientation
11" × 17"L, 8 " × 14"L, 8
1
/
2
14"L, 8" × 10"L
11" × 17"L, 8 " × 14"L, 8
1
/
2
" × 8
1 1
14"L, 5 / / "L
2 2
" × 14"L,
1
/
2
" × 13"L
1
/
2
" × 11"KL, 10" ×
1
/
2
" × 11"KL, 10" ×
1
/
2