Input/Output - Toshiba e-studio 900 Operator's Manual

Input/Output

SADF Auto Reset
When you set one original at a time in the ADF, the Auto Feed indicator lights
for a selected time after an original is fed, showing it is ready for another orig-
inal.
Note
You can adjust this time from 3 seconds to 99, in 1 second increments.
Eject Copy Face Up/Down in Glass
You can specify the way copies are delivered when copying an original from
the exposure glass.
Auto Sort
You can have Sort mode selected when the machine is turned on or reset, or
if the mode is cleared.
Memory Full Auto Scan Restart
If memory becomes full while scanning, the machine can make copies of
those already scanned, and then automatically resume scanning remaining
originals.
You can enable or disable this function.
Note
If you select [Off]:
• When memory becomes full, the machine stops operations allowing
you to remove copies delivered to the output tray.
If you select [On]:
• You can leave the machine unattended to make all the copies, but re-
sulting pages will not be sequentially ordered.
Sort/Stack Shift Tray Setting
You can select to turn Shift Tray Setting on or off in sort or stack mode.
Insert Separation Sheet
You can set the number of sets between Separation Sheets.
Note
You can set the number from 1 set to 999 sets.
Select Staple Position
You can register a frequently-used type of stapling in the top left staple key
on the initial display. You can also change the registered type.
Settings You Can Change with User Tools
4
139