Table of Contents
Advertisement
6.17
Rate Limiting
You can set up every port's bandwidth rate and frame limitation type.
Ingress Limit Frame type: select the frame type you wants to filter. There are four
frame types for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast only
types are only for ingress frames. The egress rate only supports All type.
All the ports support port ingress and egress rate control. For example, assume port 1 is
10Mbps, users can set it's effective egress rate to 1Mbps, ingress rate is 500Kbps. The
switch performs the ingress rate by using a packet counter to meet the specified rate
Ingress: Enter the port effective ingress rate (The default value is ―0‖).
Egress: Enter the port effective egress rate (The default value is ―0‖).
And then, click
71
Rate Limiting interface
Apply
to apply the settings
Manual Documentation Number EIRP610-2SFP-T – 0912m
Web-Based Management
www.bb-elec.com
www.bb-europe.com
Advertisement
Table of Contents
