Tftp Commands Set; Systemlog, Smtp And Event Commands Set - B&B Electronics e-Linx EIRP610-2SFP-T User Manual

TFTP Commands Set

Netstar Commands
backup flash:backup_cfg
restore flash:restore_cfg
upgrade flash:upgrade_fw

SystemLog, SMTP and Event Commands Set

Netstar Commands
systemlog ip
[IP address]
systemlog mode
[client|server|both]
show systemlog
show systemlog
no systemlog
smtp enable
smtp serverip
137
Level Description
Save configuration to
G
TFTP and need to specify
the IP of TFTP server and
the file name of image.
G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name of
image.
Upgrade firmware by
G
TFTP and need to specify
the IP of TFTP server and
the file name of image.
Level Description
G Set System log server IP
address.
G Specified the log mode
E Displays system log.
P Show system log client
& server information
G Disable systemlog
functon
G Enable SMTP function
G Configure SMTP server switch(config)#smtp serverip
Manual Documentation Number EIRP610-2SFP-T – 0912m
Command Sets
Defaults Example
switch(config)#backup
flash:backup_cfg
switch(config)#restore
flash:restore_cfg
switch(config)#upgrade
flash:upgrade_fw
Example
switch(config)# systemlog ip
192.168.1.100
switch(config)# systemlog mode both
Switch>show systemlog
switch#show systemlog
switch(config)#no systemlog
switch(config)#smtp enable
www.bb-elec.com
www.bb-europe.com