Port Commands Set - B&B Electronics e-Linx EIRP610-2SFP-T User Manual

Netstar Commands
no security telnet

Port Commands Set

Netstar Commands
interface fastEthernet
[Portid]
duplex
[full | half]
speed
[10|100|1000|auto]
no flowcontrol
security enable
no security
120
Level Description
G Disable IP security of
telnet server
Level Description
Choose the port for
G
modification.
I Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast Ethernet.
I Use the speed
configuration command
to specify the speed
mode of operation for
Fast Ethernet., the speed
can't be set to 1000 if the
port isn't a giga port..
I Disable flow control of
interface
I Enable security of
interface
I Disable security of
interface
Manual Documentation Number EIRP610-2SFP-T – 0912m
Command Sets
Example
switch(config)#no security telnet
Example
switch(config)#interface
fastEthernet 2
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
switch(config-if)#no flowcontrol
switch(config)#interface
fastEthernet 2
switch(config-if)#security enable
switch(config)#interface
fastEthernet 2
switch(config-if)#no security
www.bb-elec.com
www.bb-europe.com