Sntp Commands Set - B&B Electronics e-Linx EIRP610-2SFP-T User Manual

Netstar Commands
no event authentication-
failure
no event ring-topology-
change
no event systemlog
no event smpt
show systemlog

SNTP Commands Set

Netstar Commands
sntp enable
sntp daylight
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
139
Level Description
G Disable Authentication
failure event typ
G Disable X-ring topology
changed event type
I Disable port event for
system log
I Disable port event for
SMTP
P Show system log client
& server information
Level Description
Enable SNTP function
G
G Enable daylight saving
time, if SNTP function is
inactive, this command
can't be applied.
G Set period of daylight
saving time, if SNTP
function is inactive, this
command can't be
applied.
Parameter format:
[yyyymmdd-hh:mm]
G Set offset of daylight
Manual Documentation Number EIRP610-2SFP-T – 0912m
Command Sets
Example
switch(config)#no event
authentication-failure
switch(config)#no event ring-
topology-change
switch(config)#interface fastethernet
3
switch(config-if)#no event systemlog
switch(config)#interface fastethernet
3
switch(config-if)#no event smtp
switch#show systemlog
Example
switch(config)#sntp enable
switch(config)#sntp daylight
switch(config)# sntp daylight-period
20060101-01:01 20060202-01:01
switch(config)#sntp daylight-offset 3
www.bb-elec.com
www.bb-europe.com