Table of Contents
Advertisement
Local Time Zone
ZP5 - USSR Zone 4
ZP6 - USSR Zone 5
WAST - West Australian Standard
CCT - China Coast, USSR Zone 7
JST - Japan Standard, USSR Zone 8
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
IDLE - International Date Line
NZST - New Zealand Standard
SNTP Sever URL: Set the SNTP server IP address. You can assign a local network
time server IP address or an internet time server IP address.
Switch Timer: When the switch has successfully connected to the SNTP server whose
IP address was assigned in the column field of SNTP Server URL, the current
coordinated time is displayed here.
Daylight Saving Period: Set up the Daylight Saving beginning date/time and Daylight
Saving ending date/time. Please key in the value in the format of ‗YYYYMMDD' and
‗HH:MM' (leave a space between ‗YYYYMMDD' and ‗HH:MM').
YYYYMMDD: an eight-digit year/month/day specification.
HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‗20070701 02:00' and ‗20071104 02:04' in the two column fields
respectively to represent that DST begins at 2:00 a.m. on March 11, 2007 and ends at
2:00 a.m. on November 4, 2007.
Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
minute between 0 and 720, which means you can set the offset up to 12 hours.
51
Conversion from UTC
+5 hours
+6 hours
+7 hours
+8 hours
+9 hours
+10 hours
+12 hours
Manual Documentation Number EIRP610-2SFP-T – 0912m
Web-Based Management
Time at 12:00 UTC
5 pm
6 pm
7 pm
8 pm
9 pm
10 pm
Midnight
www.bb-elec.com
www.bb-europe.com
Advertisement
Table of Contents
