System Configuration - B&B Electronics e-Linx EIRP610-2SFP-T User Manual

6.6.1 System configuration


DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will
be the DHCP server on your local network.

Low IP Address: Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.

High IP Address: Type in an IP address. High IP address is the end of the dynamic IP
range. For example, dynamic IP is in the range between 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.200 is the High IP address.

Subnet Mask: Type in the subnet mask of the IP configuration.

Gateway: Type in the IP address of the gateway in your network.

DNS: Type in the Domain Name Server IP Address in your network.

Lease Time (sec): The time period in which the system will reset the dynamic IP
assignment.

And then, click
37
Apply .
DHCP Server Configuration interface
Manual Documentation Number EIRP610-2SFP-T – 0912m
Web-Based Management
www.bb-elec.com
www.bb-europe.com