Cli Management; Commands Level - B&B Electronics e-Linx EIRP610-2SFP-T User Manual

5.4 CLI Management

The system supports Command Line Interface (CLI) management. After you log into the
system, you will see a command prompt. To enter the CLI management interface, type in
―enable‖ and press enter.
The following table lists the CLI commands and description.

5.5 Commands Level

Modes Access Method
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged command while
EXEC in User EXEC
mode.
Global Enter the
30
CLI command interface
Prompt Exit Method
Enter logout
switch>
or quit.
Enter disable
switch#
to exit.
switch To exit to
Manual Documentation Number EIRP610-2SFP-T – 0912m
Console Management
About This Mode1
The user commands available
at the user level are a subset
of those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system information.
The privileged command is
the advanced mode.
Use this mode to
• Display advanced function
status
• Save configuration
Use this mode to configure
www.bb-elec.com
www.bb-europe.com