Table of Contents
Advertisement
6.8.2 System Event Log—SMTP Configuration
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the
network. You can configure the SMTP server IP, mail subject, sender, mail account,
password, and the recipient email addresses which the e-mail alert will send to. There are
also five types of event—Device Cold Start, Device Warm Start, Authentication Failure, X-
Ring Topology Change, and Port Event—available to be issued as the e-mail alert. This
function provides the authentication mechanism including an authentication step through
which the client effectively logs in to the SMTP server during the process of sending e-mail
alert.
Email Alert: With this function being enabled, the user is allowed to configure the
detail settings for sending the e-mail alert to the SMTP server when the events occur.
SMTP Server IP: Assign the mail server IP address (when Email Alert is enabled,
this function will then be available).
Sender: Type in an alias of the switch in complete email address format, e.g.
switch101@123.com, to identify where the e-mail alert comes from.
Authentication: Having marked this checkbox, the mail account, password and
confirm password column fields will then show up. Configure the email account and
password for authentication when this switch logs in to the SMTP server.
Mail Account: Set up the email account, e.g. johnadmin, to receive the email alert. It
must be an existing email account on the mail server.
Password: Type in the password for the email account.
Confirm Password: Reconfirm the password.
Rcpt e-mail Address 1 ~ 6: You can also fill each of the column fields with up to 6 e-
mail accounts to receive the email alert.
Click
Apply
44
to have the configuration take effect.
Manual Documentation Number EIRP610-2SFP-T – 0912m
Web-Based Management
www.bb-elec.com
www.bb-europe.com
Advertisement
Table of Contents
