Initial Setting - Konica Minolta bizhub C300 Network Fax Operations

10
10.5

Initial setting

Set the default of the Fax function.
It is possible to set a Fax function that is selected when the Main Power is
turned on or when [Reset] is pressed.
For this setting, display the Fax screen and press the [Utility/Counter] on this
screen.
Item
Fax
*
indicates factory default setting.
1
Open the User Setting screen (See "Entering user setting" on
page 10-3).
2
Press [Initial Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Initial
Setting], enter 3 through the numeric keypad.
10-24
Description
[Current Setting]:
Before entering the Utility Mode, each of
the items that have been set on the touch
panel is registered as the default of fax
function.
[Factory Default]:
Values set when shipped from the factory
are registered as the default of fax function.
Utility mode
Available value
Current Setting / Fac-
*
tory Default
Network Fax