Setting The Default Of The Text Of The E-Mail - Konica Minolta bizhub C300 Network Fax Operations

Registering/Settings

Setting the default of the text of the e-mail

The text set to the initial value here is used for the Internet Fax transmission.
The procedure for setting the default of the text of the E-Mail is as follows.
1
See "Displaying the fax registration screen" on page 9-3, to display the
Fax Registration screen.
2
Press [Subject/Text (for E-mail)].
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of
[Subject/Text (for E-mail)], enter the "4" on the keypad.
3
Press [Text].
Network Fax
9
9-31