Konica Minolta bizhub C300 Network Fax Operations page 168

7
4
When you want to make the edge section clear and sharp, or when you
want to make it smooth, press
– To release the setting, press [Cancel].
5
Press [OK].
The Application screen will be restored.
6
Press [OK].
The Scan Setting screen will be restored.
7
Press [OK].
The fax screen will be restored.
8
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-19 for information
about setting functions in the fax screen. See "Application
functions overview" on page 7-5 for information about setting
functions in the fax Application screen.
9
Designate the destination.
– See "Method for specifying addresses" on page 3-31 for
designating the destination.
10
Set the original document.
– See "Placing the original on the machine" on page 3-12 for
information about setting the document.
7-28
Transmission applications
or to the [+] or [-] side.
Network Fax