Utility mode
10.13 Network fax function settings
Set items related to the network fax.
Item
Network Fax
Function Set-
ting
Network Fax
Function Set-
ting
*
indicates factory default setting.
Note
To use the IP Address Fax function, a fax kit is required optionally.
For details of the optional fax kit, contact your service representative.
1
Open the Administrator Setting screen (See "Entering administrator
setting" on page 10-4).
2
Press [Network Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
Network Fax
Description
IP Address Fax
When the IP Address Fax is
used, a setting is made to ON.
Internet Fax
When the Internet fax is used, a
setting is made to ON.
10
Available value
ON / OFF*
ON / OFF*
10-45