Transmission
3.5
Setting transmission conditions
Original Image Type, Density, Simplex/Duplex and Resolution are displayed
when [Scan Setting] is pressed on the fax screen. These can be used to set
transmission conditions according to the type of original to be sent.
!
Detail
The condition for transmission cannot be set in units of page.
1
Press [Scan Setting] on the fax screen.
2
Press the key desired to be set.
–
In the case of the monochrome mode
–
In the case of the color mode
–
Display on the screen varies depending on the country.
Network Fax
3
3-19