Utility mode
10.4
Fax active screen
Set the message in transmission if it is displayed on the screen or not.
Item
TX Display
RX Display
*
indicates factory default setting.
Fax active screen
1
Open the User Setting screen (See "Entering user setting" on
page 10-3).
2
Press [Display Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Display
Setting], enter 2 through the numeric keypad.
Network Fax
Description
Set the message in [Transmission] if it is
displayed on the screen or not.
Set the message in [Receive] if it is dis-
played on the screen or not.
10
Available value
*
ON / OFF
*
ON / OFF
10-21