Scan/Fax Program; Register Scan/Fax Program; Register Program - Name - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
User mode settings
9.2.13
Scan/Fax Program
Register a combination of destination to which data is sent frequently, scan setting, original setting, and
communication setting in program. If these items are registered in program, you can call the registered
destination, and the Scan Setting mode, Original Setting mode, and Communication Setting mode by simply
touching the [Mode Memory] key.
!
Detail
Up to 400 normal programs and 10 "temporary programs" that are used temporarily can be registered
in program.
If 410 programs have been already registered, delete an unnecessary program, and then register new
one.
Register Scan/Fax Program
1
Press the [Fax/Scan] key on the control panel, and then specify Scan Settings, Original Settings and
Communication Settings for program registration.
2
Press the [Mode Memory] key.
3
Select an unregistered key, and then touch [Register Program].
The Register Scan/Fax Program screen appears.
Register Program - Name
%
Enter the program registration name using up to 24 characters from the touch panel.
bizhub C353/C253/C203 (FE2)
9
9-39
Advertisement
Table of Contents
Troubleshooting
