Receiving Data (G3: When The External Phone Is Connect); Manual Rx (Phone Only) - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
6
6.2
Receiving data (G3: When the external phone is connect)
6.2.1
Manual RX (phone only)
This mode is useful if this machine is frequently used as a phone with an external phone connected to it.
1
To receive data through manual panel operation on this machine, when the external phone starts
ringing, touch [Off-Hook] in the Fax/Scan mode screen.
2
Check that [RX] is enabled.
3
In the Off-Hook screen, touch [Start].
When the machine is used in manual reception mode, the following settings are assumed.
-
External phone: Connected.
-
Line Parameter Setting - Receive Mode: [Manual RX] is specified.
!
Detail
To use the machine in the phone-only mode, set the receiving method to manual reception in the Line
Parameter Setting screen in the Utility mode.
6-4
Incoming
The external phone continues ringing
Receiving data (G3/IP/I-FAX)
Pick up the receiver and talk
bizhub C353/C253/C203 (FE2)
Advertisement
Table of Contents
Troubleshooting
