Redialing (G3/Ip); Redial; Manual Redialing - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
Transmitting data
5.8
Redialing (G3/IP)
Redialing refers to the action to dial the same recipient again.
Redialing takes place after a certain length of time when the line is busy and transmission has failed.
5.8.1
Redial
If transmission has failed because the line is busy, the recipient's number is automatically redialed as many
times as specified in the Line Parameter Setting screen.
Until successfully redialed, the transmission job is handled as a scheduled job in a redialing queue.
!
Detail
The factory setting for automatic redialing is to have redialing performed three times at an interval of
three minutes. For details on how to set the number of automatic redialing instances, refer to "Fax
Settings - Line Parameter Setting" on page 10-22.
5.8.2
Manual redialing
A job in the redialing queue can be redialed from the Job Details screen.
1
Touch [Job List].
2
Touch [Job Details].
3
Touch [Send].
4
Select a job under "Current Jobs".
5
Touch [Redial].
bizhub C353/C253/C203 (FE2)
5
5-87
Advertisement
Table of Contents
Troubleshooting
