For Windows 2000/Nt 4.0 - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
Fax Driver
18
Follow the on-screen instructions.
–
If the User Account Control window appears, click the [Continue] button.
–
If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
19
Click the [Finish] button.
20
When installation is completed, make sure that the icon of the installed printer appears in the Printers
and Faxes window.
21
Remove the DVD from the DVD drive.
This completes the fax driver installation.
Note
If both of "RAW Port Number" and "LPD Setting" are enabled in the network settings of this machine,
check the available printer ports and change the settings if necessary. For details, refer to the User
manual – Print Operations.
For Windows 2000/NT 4.0
Reminder
When installing Windows NT/4.0, administrator permissions are required.
1
Insert the printer driver DVD into the computer's DVD drive.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click the "Add Printer" icon.
The Add Printer Wizard starts up.
4
Follow the on-screen instructions.
5
In the screen for selecting the printer connection, select "Local Printer".
6
Click the [Next] button.
A screen for specifying ports appears.
7
Click "Create a new port", and then select "Standard TCP/IP Port" for the type of port.
–
For Windows NT 4.0, select "LPR Port" in the "Available Printer Ports" list, and then click the [New
Port] button. For details, refer to the User manual – Print Operations.
8
Click the [Next] button.
The Add Standard TCP/IP Printer Port Wizard starts.
9
Click the [Next] button.
10
In the "Printer Name or IP Address" box, enter the IP address for this machine, and then click the [Next]
button.
–
If the Additional Port Information Required dialog box appears, go to step 11.
–
If the Finish screen appears, go to step 14.
11
Select "Custom", and then click the [Settings] button.
12
Change the settings according to the port, and then click the [OK] button.
–
For an LPR connection, Select "LPR", and then enter "Print" in the "Queue name" box.
–
For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
–
The information entered here is case-sensitive.
bizhub C353/C253/C203 (FE2)
11
11-11
Advertisement
Table of Contents
Troubleshooting
