Relay Distribution (G3); Relay Distribution; To Enable Relay Distribution - Konica Minolta bizhub C203 Operation Manual

7
7.5

Relay distribution (G3)

7.5.1

Relay distribution

This function saves a fax document to be transmitted in a relay station, and then transmit it to destinations
from the relay station. If broadcasting to remote recipients frequently occurs, the overall communications
cost can be reduced by grouping a relay station and destinations by area, compared to individual
transmissions.
A fax machine that functions as a relay station to which relay request is issued is referred to as a relay
instruction station.
A fax machine that receives faxes from a relay instruction station and relays it on is referred to as a relay
distribution station.
This relay distribution function is available only when the relay distribution machine is a model having the F-
code functions.
This cannot be used with the following functions:
- Polling TX
- Polling RX
- Bulletin Registration
- Bulletin Polling RX
- Password TX
7.5.2

To enable relay distribution

This machine can function as a relay distribution station as well as a relay instruction station.
For the procedure for sending a fax from this machine as a relay instruction station, refer to "Transmitting
faxes to a relay distribution station" on page 7-7.
In order to use this machine as a relay distribution station, it is necessary to specify a relay user box for saving
documents to be distributed via a relay station and destinations.
% To specify destinations, specify a group destination beforehand.
Note
For details on the procedure for creating relay user boxes, refer to the User manual – Box Operations.
7-6
Originating station Intermediate relay station
Toll Call
Useful functions (G3/IP/I-FAX)
Terminating station
Local Call
Terminating station
bizhub C353/C253/C203 (FE2)