Transmitting data
F-Code TX
Sends data to the specified user box of the recipient by entering the SUB address and Sender ID. The
following two types of user boxes can be specified.
-
Confidential transmission
–
Sends data to the confidential transmission user box of the recipient. Enter the user box number as the
SUB address, and the confidential transmission password as the Sender ID.
-
Relay transmission
–
Sends data to the relay transmission user box when the recipient machine has the relay distribution
function. Enter the relay user box number as the SUB address, and the relay transmission password as
the Sender ID.
%
Specify the SUB address or transmission ID for the recipient.
!
Detail
The recipient needs to have the F-code function to use an F-code.
5.7.5
E-Mail Encryption (E-Mail)
This parameter appears when "ON" is selected for "S/MIME Communication Settings" (in [E-Mail Settings] in
the Network Settings screen in Administrator mode.
%
Specify whether or not to encrypt the E-Mail to be sent.
Note
For details on the S/MIME communication settings, refer to the User manual – Network Administrator.
5.7.6
Adding Digital Signature (E-Mail)
This parameter appears when "ON" is selected for "S/MIME Communication Settings" (in [E-Mail Settings] in
the Network Settings screen in Administrator mode.
%
Specify whether or not to add a digital signature to E-Mail messages for transmission.
!
Detail
This parameter may not be available or may be set to normally sign, depending on the specified S/MIME
communication settings.
Note
For details on the S/MIME communication settings, refer to the User manual – Network Administrator.
bizhub C353/C253/C203 (FE2)
5
5-85