Method 2 – Manual White Balance
Using the Shooting Menu
This method is similar to Method 1, but it uses the
Menu
screens to select the Kelvin range. Instead of using the
WB button
and
menus and set the color temperature by selecting from them.
Here are the screens and steps used to select a
setting (see
Figure
Figure 10-11. Shooting Menu White balance screens
1. Select
White balance
to the right.
2. Select one of the preset values, such as
and scroll to the right.
3. Press the
little square from its center position.
Normally you'll use only the first two screens (in
Figure
10-11) to select one of the preset WB values, such as
Cloudy, Shade, or
Sub-command
10-11):
from the
OK button
immediately, without moving the
Direct
sunlight. Then you'll just press the
695
dial, you'll open up your
White balance
Shooting Menu
Flash
Shooting
and scroll
or Cloudy,