Nikon D300 User Manual page 408

occasionally. By setting
hold down the Selected button and the camera will then
allow you to change the shutter speed or aperture in
step increments (1 EV step) instead of the normal
step. Example shutter speeds in 1/3 EV steps are: 1/60,
1/80, 1/100, 1/125, 1/160. Example shutter speeds in 1
EV step are 1/60, 1/125, 1/250, 1/500, 1/1000. This
cannot be assigned to
dials.
▪ Choose non-CPU lens number –
configured non-CPU lenses under the camera's
Menu > Non-CPU lens
down the
Selected button while rotating the
scroll through a list of up to nine non-CPU lenses.
▪ Auto bracketing – Hold down the Selected button while
rotating the rear
images in the bracket. You can also hold down the
Selected button and rotate the front
to select the bracketing increment.
▪ Dynamic AF area – This function only works under
specific circumstances.
(Focus mode selector
must be selected
position). Then you can hold down the Selected button
and rotate either of the
number of AF points to one of four settings: 9, 21, 51, or
51 points (3D-tracking).
▪ None – Nothing happens when you hold down the
Selected button and rotate the
1 step
AE-L/AF-L button + command
data, then you'll be able to hold
Main command dial
Continuous-servo AF
is on C), and
(AF area mode selector
Command dials
Command
408
spd/aperture, you can
If you have
Sub-command dial
to set the number of
Sub-command dial
must be on
Dynamic-area AF
is in its middle
to change the
dials.
1
1/3
Setup
to