Nikon D300 User Manual page 514

Figure 5-40. AF fine tune configuration screens
AF fine tune (On/Off) – In
tune (On/Off)
can select are as follows:
▪ On – This setting turns the
Without this enabled, the D300(S) focuses like a factory
default D300(S).
▪ Off – This default setting disables the
system.
Saved value – With an AF lens mounted,
you to control the amount of front or back focus you'd like to
input for the listed lens. At the top left of the configuration
screen in Figure
value, you'll see the focal length of the lens mounted on your
camera, the maximum aperture, and the number assigned to
the lens. If you're configuring a lens for the first time, you'll
probably see No.
lenses.
screen and its selections. The two values you
5-41, image 2, just under the words
1. You can fine-tune for a maximum of 12
514
Figure 5-40 we see the
AF fine tune
Saved value
AF fine
system on.
AF fine tune
allows
Saved