Nikon D300 User Manual page 367

exposure in the bracket. This value appears on the top
right of each screen in
Figure 4-57. Auto bracketing (AE & flash)
4. While holding the
Sub-command dial
image in the bracket, in steps of 1/3, 1/2, or
EV step value is set in
exposure control. In
is 1.0. So there will be a 1.0 EV step (1 stop) difference
between each image in the bracket.
5. You can use
the order of the exposures. We'll discuss this in a later
section titled
normal > underexposed >
it to underexposed > normal >
like.
6. Take the bracketed picture series. As you take each
image, one of the lines that hang down below the
scale will disappear. When they are all gone, your
bracket is complete. If you have your camera set to one
of the Continuous release
down the Shutter-release
only the number of images in the bracketed series and
then stop firing.
Figure 4-57
Fn (FUNC.) button, rotate the front
to change the EV value of each
Custom setting b2 > EV steps for
Figure
Custom setting e7 > Bracketing order
Bracketing Order. The default order is
overexposed. You can change
modes
button, the camera will fire off
367
as 1.0, 0.3, and 0.3.
4-57, image 1, the EV value
overexposed, if you'd
(CL or CH) and hold
1 EV. The
to set
+/-