Nikon D300 User Manual page 317

If Beep is enabled, the camera will let you know when you
have focused successfully in
by beeping once. It does not beep in
Autofocus (AF-C) since it would be beeping constantly as the
focus adjusts to the subject. Also, if you have
a2 > AF-S priority selection
the beep will not sound for autofocus in AF-S.
When Beep is active, you'll see a little musical note displayed
in the top Control panel
Here are the screens and steps used to select one of
three choices (see
Figure 4-31. Beep
1. Select d Shooting/display
and scroll to the right (see
2. Highlight
image 2).
3. Choose one of the three choices on the list. In
Figure 4-31, image 3,
4. Press the
and also in the
Figure 4-31):
Beep and scroll to the right (see
Off
OK button to lock in the setting.
Single-servo Autofocus
configured to
Information
from the Custom Setting Menu
Figure 4-31, image 1).
has been selected.
317
(AF-S)
Continuous-servo
Custom setting
Release priority,
display.
Beep's
Figure 4-31,