Nikon D300 User Manual page 692

Figure 10-9. Screens to recover a White balance setting
from an image
2. Use the Multi Selector
you want to set with the value from an image (see
Figure 10-9, image 1). You must select
You cannot use
selector center button
want to replace.
3. Scroll down to
Figure 10-9, image 2). It will be grayed out if there are
no images on your current memory card.
4. You will now see the
Figure 10-9, image 3). Navigate through the available
images until you find the one you want to use for white
balance information.
5. Press the Multi selector center button
of the image will appear in your selected
memory location (see
to scroll to the memory location
d-0 for this operation. Press the
to select the memory location you
Select image and scroll to the right (see
Select image
Figure 10-9, image 4).
692
d-1–d-4 only.
Multi
screen (see
and a small picture
White balance