Nikon D300 User Manual page 178

Figure 3-29. Rename a Custom Picture Control
3. Select one of your Custom Picture Controls from the list
(C-1 to C-9) and scroll to the right (see
image 3). I selected to rename NEUTRAL-02. This is
the Custom Picture Control I created under the
section.
4. You'll now be presented with the
create a different name, hold down the
playback zoom out button
scroll back and forth within the old name. When you
have the small gray cursor positioned
over a character, you can delete that character with the
garbage can
position the yellow cursor in the character list above and
press the
the center of the
character that is under the yellow cursor will appear on
the name line below, at the position of the gray cursor. If
there is already a character under the gray cursor, it will
be pushed to the right. Please limit the name to a
maximum of 19 characters (see
5. Press the
name. I renamed the Custom Picture Control previously
named
NEUTRAL-EXSHARP.
Note: You can have more than one control with exactly the
same name in your list of Custom Picture Controls. The
camera does not get confused because each control has a
Delete button. To insert a new character,
Multi selector center button
Multi Selector
OK button when you have completed the new
NEUTRAL-02,
Rename
and use the
on the D300. The
Figure
in Figure
178
Figure 3-29,
Save/edit
screen. To
Thumbnail/
Multi Selector
on the D300S or
3-29, image 4).
3-29,
to
to