Flash Cntrl For Built-In Flash; Custom Setting E3 (D300S And D) - Nikon D300 User Manual

shutter still open and with enough ambient light to record a
blurred ghost effect. You'll have a well-exposed picture of the
subject with a ghost of him also showing in the image. Only
use slower shutter speeds when you are sure that you'll be in
dark conditions and the flash will provide the only
lighting—unless you're shooting special effects, like a blurred
aftereffect following your subject to imply movement.

Flash Cntrl for Built-in Flash

Custom setting e3 (D300S and D300)
(User's Manual – D300S page 283; D300 page 291)
Flash cntrl for built-in flash provides four distinct ways to
control the pop-up Speedlight's flash output. This Custom
setting does not apply to flash units you attach via the
Accessory shoe (hotshoe) on top of the camera. It is only for
the pop-up flash.
Here are the screens and steps used to configure Flash cntrl
for built-in flash (Figure 4-50):
Figure 4-50. Flash cntrl for built-in flash – TTL mode
1. Select e Bracketing/flash from the Custom Setting Menu
and scroll to the right (see Figure 4-50, image 1).
353