Nikon D300 User Manual page 524

copy the firmware update files (e.g., D300S101.BIN)
into the root folder (top level) of your camera's memory
card.
3. Make sure that you have a fully charged battery
powering the camera, turn off the camera, and insert the
memory card containing the firmware update file.
Continuing from
now an Update
selection in
4. Select Update
image 1).
5. Choose Yes
Figure 5-47, image 2).
Do not turn the camera off during the firmware
upgrade process or it may need to be repaired by Nikon
before it will work again! You will receive instructions
on the camera's
camera off.
6. You'll see the update taking place with a screen like the
one in Figure
move from left to right while the update is happening.
Do not touch the camera while this update is taking
place.
7. The update process will be finished when the progress
bar reaches the right side. A final screen will pop up
informing you, Update completed. Turn camera off (see
Figure 5-47, image 4). It is now safe to turn the camera
off and back on. When it comes back on, the new
firmware will be running.
Figure 5-46, you'll notice that there is
choice that appears below the
Figure 5-47, image 1.
and scroll to the right (see
from the menu and press the
Monitor
5-47, image 3. The green progress bar will
524
OK button
when it is safe to turn the
Done
Figure 5-47,
(see