card, you can skip the source card selection step. Refer to
Figure 2-15
(or the camera's actual menu) and follow these
steps to select a source card:
1. Select
Copy image(s)
2. Choose
Select source
3. Choose one of the card slots. I use the SD card as my
primary card, so
SD card slot
Shooting Menu > Primary slot selection
choose which card is the primary for your camera—SD
or CF.
4. Press the
Once you've chosen a source, it's time to select images to
copy. It's a somewhat complex process to describe but fairly
easy to use. The image selection choices were a little
confusing to me at first. I was expecting a selection saying
something like, "Select images to copy". However, you are
only given these three options:
▪
Deselect all
▪
Select all images
▪
Select protected images
What if you want to copy only one image, or five? All three
ways listed allow you to choose images for copying, even
though it seems a little counter-intuitive at first.
from the
from the
Figure 2-15
as the source. Note: You can use the
OK button
to lock in your choice.
Playback
Copy image(s)
shows that I selected the
62
Menu.
menu.
function to