Table of Contents
Advertisement
Connections
Refer to the illustration below to connect instruments, mics, other audio equipment and a computer,
for example.
Outputs
❶
Headphones
❷
Stereo systems, speakers
with built-in ampliiers, etc.
Rear panel
❼
FOOTSWITCH
Connect a ZOOM
FS01 footswitch (sold
separately), and use it
to stop/start playback
or punch-in/out, for
example.
❾
AC adapter
Only use a ZOOM
AD-17 AC adapter,
which is designed for
use with this unit.
12
Connect cables with XLR or phone plugs (mono/stereo, balanced/
unbalanced) to the
❸
Microphones
•
•
•
❹
Devices with stereo outputs
When using a synthesizer, a CD
player or other stereo devices:
•
•
❶
❾
Inputs
INPUT
jacks.
Connect a mic to
INPUT 1
or 2.
Set the input selection switch to
MIC
LINE.
PHANTOM
Set the
switch to
ON
to supply phantom power to
a condenser mic.
Connect
OUTPUT
jack
L
to
INPUT 1
and
R
to
INPUT
2.
Set both input selection switches
to
MIC
LINE.
❸
❷
Right side panel
❽
When connected to a computer, you
can transfer audio iles with it, for
❽
example. You can also use the
as an audio interface and a control
surface for DAW software.
❺
Guitar/bass
To connect a passive electric
guitar or bass directly:
•
Connect it to
INPUT
•
Set input selection switch
GUITAR BASS
(Hi-Z).
❻
Built-in microphones
Use the built-in mics on the left
and right of the unit to record
drums or a band performance,
for example.
•
Set both input selection
switches
(1
for left and
right) to
BUILT-IN
❹
Computer USB port connections
1.
1
to
2
for
MIC.
❺
Hide quick links:
Advertisement
Table of Contents
