Adjusting The Input Gain - Zoom R8 Operation Manual

Adjusting the input gain

1 Push the INPUT ON/OFF switch for the
connected input to turn it on, lighting
the indicator red.
When red, input is possible
2
Adjust the input GAIN.
Make
noise!
NOTE
● The
PEAK indicator turns red when the
signal exceeds the maximum detectable
level of 0 dB, resulting in input clipping.
● If clipping happens, the recorded sound
will be distorted, so you should reduce the
recording level.
22
Adjust the
input gain
Adjust so it does not light when
maximum volume is input