Making Connections - Zoom V6 Operation Manual

Making connections

Mic (ZOOM SGV-6 or
commercially-avail-
able mic)
or
When connecting a
ZOOM SGV-6, condens-
er mic or other device
that requires phantom
power, set the PHAN-
TOM switch to ON.
Expression pedal (ZOOM
FP02M)
Connected to the EFFECT
CONTROL jack, the pedal
can be used to control the
effect.
NOTE
Always set the PHANTOM switch to OFF when connecting a device that does not support phantom pow-
er. The device could be damaged if this is not done.
Use a mic cable to
connect it to the MIC
IN jack.
Use a Micro USB ca-
ble to connect to the
USB port.
Connect a cable with an XLR connector
(female) to the OUTPUT jack.
Use a cable with a connector that suits
the PA system or recorder input jack.
The
Connect it to a line input jack on the other
equipment.
Stereo mini plug
headphones
This connects/disconnects the out-
put jack ground.
Computer
• CONNECT: The grounding pin is
connected to the ground.
• LIFT: The grounding pin is discon-
nected from the ground. This is
effective if noise is caused by a
ground loop.
10
output is line level.
Mixer, PA system, recorder,
etc.
or
AC adapter (ZOOM
AD-16)