Setting Loops; Setting A Track To Loop - Zoom R8 Operation Manual

Setting loops

To use the sampler function, you must set a track to loop, making it a loop track. Here we explain
how to make this setting.

Setting a track to loop

Tracks can be individually set to loop.
1
Press
2
Select the track to loop.
3
Select LOOP.
Press
4
Select ON/OFF and set it to On
to enable loop playback.
64
Select track
Change menu
Change menu
Change setting
NOTE
● The status key indicator of a track set to
loop lights orange instead of green when
enabled for playback. A track set to loop
cannot be used to record (indicator will not
light red). In addition, the following functions
can be used when a track is set to loop.
- The pad can be used to trigger the loop.
PLAY
- Pressing starts loop playback.
- Sequence data can be recorded.
● When a rhythm pattern is assigned to a
track, it cannot be set to loop.