Recording To A New File; Playing Back Recordings - Zoom R8 Operation Manual

Recording to a new ile
1
Press
2 Select the track for recording the new
file.
Select TAKE.
3
Select FILE.
4
Select New Take.
5
HINT
● "TAKE" shows the file name. File names
are assigned automatically in order starting
with "MONO-000.WAV" (for a stereo track
"STE-000.WAV") followed by "MONO-001.
WAV", "MONO-002.WAV" and so on. File
names can be changed as necessary. (See
"Changing project and audio file names" on
P .9 4.)

Playing back recordings

1 Press the status key for the recording
destination track until it lights green.
Ready to PLAY when
Select track
green
2 Return to the beginning of the song.
Press
ing
Change menu
Press
3 Start playback.
Change menu
4 Stop playback.
Press
Select file
NOTE
● When the REC MODE is set to Overwrite,
the recorded audio file will be overwritten
Press
on the track. If you return to the beginning
of the song and record, the previous
recording will be overwritten, so be careful.
When a track is ready to PLAY, the file on it
will be played back.
HINT
● You can change the playback file to a
different take. ("Changing the playback
take" on P .30.)
Playback track
Press 1-2 times
until lit green
REW while pressing and hold-
STOP
to return to the beginning.
Press
Lit green
Press
Lit green
27